Saltstack rpm, Cloudhub dependent packages(TI[C]K Stack), 기타 rpm
설치에 필요한 rpm 파일은 NAS 스토리지의 CloudHub 폴더에 있으므로 USB 또는 CD에 복사합니다.
Local Repository 구성
createrepo rpm을 아래와 같은 순서로 dependencies 설치합니다.
[root@mini yum]# rpm -ivh /root/repos/deltarpm-3.6-3.el7.x86_64.rpm 경고: deltarpm-3.6-3.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY 준비 중... ################################# [100%] Updating / installing... 1:deltarpm-3.6-3.el7 ################################# [100%] [root@mini yum]# rpm -ivh /root/repos/python-deltarpm-3.6-3.el7.x86_64.rpm 경고: python-deltarpm-3.6-3.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY 준비 중... ################################# [100%] Updating / installing... 1:python-deltarpm-3.6-3.el7 ################################# [100%] [root@mini yum]# rpm -ivh /root/repos/libxml2-python-2.9.1-6.el7.5.x86_64.rpm 경고: libxml2-python-2.9.1-6.el7.5.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY 준비 중... ################################# [100%] Updating / installing... 1:libxml2-python-2.9.1-6.el7.5 ################################# [100%] [root@mini yum]# rpm -ivh /root/repos/createrepo-0.9.9-28.el7.noarch.rpm 경고: createrepo-0.9.9-28.el7.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY 준비 중... ################################# [100%] Updating / installing... 1:createrepo-0.9.9-28.el7 ################################# [100%]
기존 yum repository 파일 백업 및 local repo 파일을 작성합니다.
# 기존 repo 파일을 백업합니다. $ cd /etc/yum.repos.d 합계 40 -rw-r--r--. 1 root root 1664 10월 23 23:53 CentOS-Base.repo -rw-r--r--. 1 root root 1309 10월 23 23:53 CentOS-CR.repo -rw-r--r--. 1 root root 649 10월 23 23:53 CentOS-Debuginfo.repo -rw-r--r--. 1 root root 630 10월 23 23:53 CentOS-Media.repo -rw-r--r--. 1 root root 1331 10월 23 23:53 CentOS-Sources.repo -rw-r--r--. 1 root root 8515 10월 23 23:53 CentOS-Vault.repo -rw-r--r--. 1 root root 314 10월 23 23:53 CentOS-fasttrack.repo -rw-r--r--. 1 root root 616 10월 23 23:53 CentOS-x86_64-kernel.repo $ mkdir bak $ mv * bak/ # local repo 파일 작성 # baseurl은 rpm이 있는 local 디렉토리 경로 $ vi local.repo [localrepo] name=localrepo baseurl=file:///root/repos enabled=1 gpgcheck=0
cloudhub 솔루션에 필요한 rpm 파일을 임의 디렉토리(e.g. /root/repos)에 복사합니다.
createrepo 에 방금 복사한 rpm이 있는 디렉토리를 local repository로 등록합니다.
# yum repository에 다운받은 패키지 등록 [root@mini repos]# createrepo /root/repos/ Spawning worker 0 with 31 pkgs Workers Finished Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Sqlite DBs complete
신규 rpm 패키지 추가시 주의사항
yum에 추후 새로운 패키지(rpm)를 추가할 경우, yum clean all 를 실행하여 repository를 초기화 해줘야 합니다. 초기화를 안하면 추가된 패키지를 인식하지 못합니다.
$ yum repolist all
repo id repo name status
localrepo localrepo enabled: 31
repolist: 31$ yum clean all
Cleaning repos: localrepo
Other repos take up 60 M of disk space (use --verbose for details)
# 새로운 패키지를 /root/repos/ 복사
$ createrepo /root/repos/$ yum repolist all
repo id repo name status
localrepo localrepo enabled: 119
repolist: 119
Install Cloudhub dependent package
(외부 인터넷을 사용할 수 없으므로 docker는 설치하지 않습니다. docker에서 사용한 Influxdb, kapacitor는 rpm 설치하고 설정 파일을 수정해야 합니다.)
# 기타 패키지 설치 $ yum install -y net-tools $ yum install -y screen $ yum install -y ntp $ yum install -y rdate $ yum install -y vim $ yum install -y openssl-devel $ yum install -y gcc $ yum install -y wget $ yum install -y telnet # python3.6 설치 $ yum install -y python36u python36u-devel python36u-libs python36u-pip
Install package
Influxdb
install
$ yum localinstall influxdb-1.8.0.x86_64.rpm Examining influxdb-1.8.0.x86_64.rpm: influxdb-1.8.0-1.x86_64 Marking influxdb-1.8.0.x86_64.rpm to be installed Resolving Dependencies --> Running transaction check ---> Package influxdb.x86_64 0:1.8.0-1 will be installed --> Finished Dependency Resolution Dependencies Resolved ============================================================================================================================================================ Package Arch Version Repository Size ============================================================================================================================================================ Installing: influxdb x86_64 1.8.0-1 /influxdb-1.8.0.x86_64 164 M Transaction Summary ============================================================================================================================================================ Install 1 Package Total size: 164 M Installed size: 164 M Is this ok [y/d/N]: y Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : influxdb-1.8.0-1.x86_64 1/1 Created symlink from /etc/systemd/system/influxd.service to /usr/lib/systemd/system/influxdb.service. Created symlink from /etc/systemd/system/multi-user.target.wants/influxdb.service to /usr/lib/systemd/system/influxdb.service. Verifying : influxdb-1.8.0-1.x86_64 1/1 Installed: influxdb.x86_64 0:1.8.0-1 Complete!
config 수정 : docker에서 사용한 influxdb conf와 동일하게 사용합니다.
$ vi /etc/influxdb/influxdb.conf reporting-disabled = false bind-address = ":8088" [meta] dir = "/var/lib/influxdb/meta" retention-autocreate = true logging-enabled = true [data] dir = "/var/lib/influxdb/data" wal-dir = "/var/lib/influxdb/wal" query-log-enabled = true cache-max-memory-size = 1073741824 cache-snapshot-memory-size = 26214400 cache-snapshot-write-cold-duration = "10m0s" compact-full-write-cold-duration = "4h0m0s" max-series-per-database = 1000000 max-values-per-tag = 100000 index-version = "tsi1" trace-logging-enabled = false [coordinator] write-timeout = "10s" max-concurrent-queries = 0 query-timeout = "0s" log-queries-after = "0s" max-select-point = 0 max-select-series = 0 max-select-buckets = 0 [retention] enabled = true check-interval = "30m0s" [shard-precreation] enabled = true check-interval = "10m0s" advance-period = "30m0s" [monitor] store-enabled = true store-database = "_internal" store-interval = "10s" [subscriber] enabled = true http-timeout = "30s" insecure-skip-verify = false ca-certs = "" write-concurrency = 40 write-buffer-size = 1000 [http] enabled = true flux-enabled = true bind-address = ":8086" auth-enabled = false log-enabled = true write-tracing = false pprof-enabled = true https-enabled = false https-certificate = "/etc/ssl/influxdb.pem" https-private-key = "" max-row-limit = 0 max-connection-limit = 0 shared-secret = "" realm = "InfluxDB" unix-socket-enabled = false bind-socket = "/var/run/influxdb.sock" [[graphite]] enabled = false bind-address = ":2003" database = "graphite" retention-policy = "" protocol = "tcp" batch-size = 5000 batch-pending = 10 batch-timeout = "1s" consistency-level = "one" separator = "." udp-read-buffer = 0 [[collectd]] enabled = false bind-address = ":25826" database = "collectd" retention-policy = "" batch-size = 5000 batch-pending = 10 batch-timeout = "10s" read-buffer = 0 typesdb = "/usr/share/collectd/types.db" security-level = "none" auth-file = "/etc/collectd/auth_file" [[opentsdb]] enabled = false bind-address = ":4242" database = "opentsdb" retention-policy = "" consistency-level = "one" tls-enabled = false certificate = "/etc/ssl/influxdb.pem" batch-size = 1000 batch-pending = 5 batch-timeout = "1s" log-point-errors = true [[udp]] enabled = true bind-address = ":8089" database = "udp" retention-policy = "" batch-size = 5000 batch-pending = 10 read-buffer = 0 batch-timeout = "1s" precision = "" [continuous_queries] log-enabled = true enabled = true run-interval = "1s"
service start
$ systemctl enable influxdb $ systemctl daemon-reload $ systemctl start influxdb
kapacitor
install
$ yum localinstall kapacitor-1.5.4-1.x86_64.rpm Examining kapacitor-1.5.4-1.x86_64.rpm: kapacitor-1.5.4-1.x86_64 Marking kapacitor-1.5.4-1.x86_64.rpm to be installed Resolving Dependencies --> Running transaction check ---> Package kapacitor.x86_64 0:1.5.4-1 will be installed --> Finished Dependency Resolution Dependencies Resolved ============================================================================================================================================================ Package Arch Version Repository Size ============================================================================================================================================================ Installing: kapacitor x86_64 1.5.4-1 /kapacitor-1.5.4-1.x86_64 90 M Transaction Summary ============================================================================================================================================================ Install 1 Package Total size: 90 M Installed size: 90 M Is this ok [y/d/N]: y Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : kapacitor-1.5.4-1.x86_64 1/1 Verifying : kapacitor-1.5.4-1.x86_64 1/1 Installed: kapacitor.x86_64 0:1.5.4-1 Complete!
config 수정 : docker에서 사용한 kapacitor conf와 동일하게 사용합니다.
$ vi /etc/kapacitor/kapacitor.conf hostname = "localhost" data_dir = "/var/lib/kapacitor" skip-config-overrides = false default-retention-policy = "" [http] bind-address = ":9094" auth-enabled = false log-enabled = true write-tracing = false pprof-enabled = false https-enabled = false https-certificate = "/etc/ssl/kapacitor.pem" shutdown-timeout = "10s" shared-secret = "" [replay] dir = "/var/lib/kapacitor/replay" [storage] boltdb = "/var/lib/kapacitor/kapacitor.db" [task] dir = "/var/lib/kapacitor/tasks" snapshot-interval = "1m0s" [[influxdb]] enabled = true name = "default" default = false urls = ["http://:8086"] username = "" password = "" ssl-ca = "" ssl-cert = "" ssl-key = "" insecure-skip-verify = false timeout = "0s" disable-subscriptions = false subscription-protocol = "http" kapacitor-hostname = "" http-port = 0 udp-bind = "" udp-buffer = 1000 udp-read-buffer = 0 startup-timeout = "5m0s" subscriptions-sync-interval = "1m0s" [influxdb.excluded-subscriptions] _kapacitor = ["autogen"] [logging] file = "STDERR" level = "INFO" [config-override] enabled = true [collectd] enabled = false bind-address = ":25826" database = "collectd" retention-policy = "" batch-size = 5000 batch-pending = 10 batch-timeout = "10s" read-buffer = 0 typesdb = "/usr/share/collectd/types.db" [opentsdb] enabled = false bind-address = ":4242" database = "opentsdb" retention-policy = "" consistency-level = "one" tls-enabled = false certificate = "/etc/ssl/influxdb.pem" batch-size = 1000 batch-pending = 5 batch-timeout = "1s" log-point-errors = true [alerta] enabled = false url = "" token = "" environment = "" origin = "" [hipchat] enabled = false url = "" token = "" room = "" global = false state-changes-only = false [opsgenie] enabled = false api-key = "" url = "https://api.opsgenie.com/v1/json/alert" recovery_url = "https://api.opsgenie.com/v1/json/alert/note" global = false [pagerduty] enabled = false url = "https://events.pagerduty.com/generic/2010-04-15/create_event.json" service-key = "" global = false [smtp] enabled = false host = "localhost" port = 25 username = "" password = "" no-verify = false global = false state-changes-only = false from = "" idle-timeout = "30s" [sensu] enabled = false addr = "" source = "Kapacitor" [slack] enabled = false url = "" channel = "" username = "kapacitor" icon-emoji = "" global = false state-changes-only = false [talk] enabled = false url = "" author_name = "" [telegram] enabled = false url = "https://api.telegram.org/bot" token = "" chat-id = "" parse-mode = "" disable-web-page-preview = false disable-notification = false global = false state-changes-only = false [victorops] enabled = false api-key = "" routing-key = "" url = "https://alert.victorops.com/integrations/generic/20131114/alert" global = false [kubernetes] enabled = false in-cluster = false token = "" ca-path = "" namespace = "" [reporting] enabled = false url = "https://usage.influxdata.com" [stats] enabled = true stats-interval = "10s" database = "_kapacitor" retention-policy = "autogen" timing-sample-rate = 0.1 timing-movavg-size = 1000 [udf] [deadman] interval = "10s" threshold = 0.0 id = "{{ .Group }}:NODE_NAME for task '{{ .TaskName }}'" message = "{{ .ID }} is {{ if eq .Level \"OK\" }}alive{{ else }}dead{{ end }}: {{ index .Fields \"emitted\" | printf \"%0.3f\" }} points/INTERVAL." global = falseservice start
$ systemctl enable kapacitor $ systemctl daemon-reload $ systemctl start kapacitor
etcd
install
$ yum install -y etcd Examining etcd-3.3.11-2.el7.centos.x86_64.rpm: etcd-3.3.11-2.el7.centos.x86_64 Marking etcd-3.3.11-2.el7.centos.x86_64.rpm to be installed Resolving Dependencies --> Running transaction check ---> Package etcd.x86_64 0:3.3.11-2.el7.centos will be installed --> Finished Dependency Resolution Dependencies Resolved =================================================================================================================================================== Package Arch Version Repository Size =================================================================================================================================================== Installing: etcd x86_64 3.3.11-2.el7.centos /etcd-3.3.11-2.el7.centos.x86_64 45 M Transaction Summary =================================================================================================================================================== Install 1 Package Total size: 45 M Installed size: 45 M Is this ok [y/d/N]: y Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : etcd-3.3.11-2.el7.centos.x86_64 1/1 Verifying : etcd-3.3.11-2.el7.centos.x86_64 1/1 Installed: etcd.x86_64 0:3.3.11-2.el7.centos Complete!
config
$ vi /etc/etcd/etcd.conf #[Member] ETCD_DATA_DIR="/var/lib/etcd/etcd1.etcd" ETCD_LISTEN_PEER_URLS="http://{ETCD_CLIENT_IP1}:2380" ETCD_LISTEN_CLIENT_URLS="http://{ETCD_CLIENT_IP1},http://127.0.0.1:2379" ETCD_NAME="etcd1" #[Clustering] ETCD_INITIAL_ADVERTISE_PEER_URLS="http://{ETCD_CLIENT_IP1}:2380" ETCD_ADVERTISE_CLIENT_URLS="http://{ETCD_CLIENT_IP1}:2379" ETCD_INITIAL_CLUSTER="etcd1=http://{ETCD_CLIENT_IP1}:2380" ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster-01" ETCD_INITIAL_CLUSTER_STATE="new" #[Security] ETCD_AUTO_TLS="true" ETCD_PEER_AUTO_TLS="true"service start
$ systemctl enable etcd $ systemctl daemon-reload $ systemctl start etcd
0 Comments